Drain Cleaning Methods

The Pros and Cons of Different Drain Cleaning Methods

There are two things you should be aware of when it comes to drain washing. The first is that your drain and sewage system must be kept in proper working order. You can get the drain and sewage system cleaned at least once a year. This avoids clogs from developing, eliminates any blockages that might already exist in the system, and keeps processes running smoothly in general.

The second point you should note about drain cleaning is that it should always be done by a specialist. Store-bought drain cleaners are reliable, but only because they contain corrosive chemicals. Aside from being extremely hazardous to treat, these contaminants corrode the very pipes that they are meant to help, requiring replacement potentially years earlier than they might have otherwise.

Professional plumbers use non-corrosive techniques for drain cleaning, so it’s a smart thing to entrust them to yours. If you’re interested in the basic methods used for advanced drain cleaning, read on. 

The Importance of Hiring an Experienced Professional:

While many homeowners may be inclined to do their own drain cleaning, this is normally not a smart idea. Although there are chemical materials available, they include extremely corrosive substances that can induce pipe corrosion in addition to being potentially dangerous to treat. Professionals use non-corrosive drain cleaning methods to reduce the chance of injury, so you won’t have to worry about premature pipe repair in the future. Check out Reliabledp if you are looking for a reliable professional. 

Snaking the Drain

Professional drain cleaning employs two main processes. The first method is drained snaking. Drain snaking entails drilling through some clogs in the pipe using a long string with an auger on the top. A hand crank or an electric motor is used to spin the auger. For a long time, drain snaking was the tool of option for removing drain clogs, so much so that you’d be hard-pressed to locate a plumber who didn’t have one. It is not, however, a complete cure for any case. 

The one disadvantage to using a drain snake is that it cannot collect any of the waste that can accumulate on the walls of the drain pipe. It will definitely flush away most full clogs, but if the pipes are not fully washed, they can clog more quickly in the future.

Although a snake can have a drain’s water running in the right direction, it is also seen as a temporary solution since it does not scour the inner walls of the drain, leaving deposits behind that can double as a dumping ground for potential debris. 

The plunger

It’s not just for the toilet – it can be used in any drain. As it is plunged up and down, a plunger creates suction across the drain and forces fluid into and out of the drainpipe. This can encourage whatever has accumulated within your drain to escape. It’s a simple and convenient remedy that doesn’t need any cleaners and won’t harm your pipes. 

The disadvantage of utilizing a plunger is that if there is a significant clog, it can merely drive it further into the device, necessitating a more dramatic measure, which is normally performed by a plumber and can require the use of jet rodding methods or a snake. 

Hydro Jetting

Hydro jetting is a more advanced drain cleaning method that has grown in popularity over the last few decades. It entails blasting all waste out of the pipe with a high-pressure stream of water. In certain ways, this is superior to drain snaking since it cleans out the tubing more thoroughly.

Not all pipes, though, are sturdy enough to endure the strain of hydro jetting. Depending on the condition of the tubing, hydro jetting can end up causing much more harm than good. It’s pointless to remove a clog from a pipe except to allow the pipe to leak. As a result, drain snaking is still commonly used as a first alternative, with hydro jetting used as required.

Drain Cleaners Purchased at a Store

We provide this alternative solely to explain why it is a terrible idea. If you can afford it, you can never, ever use store-bought drain cleaners. Although the majority of them are good at avoiding clogs, they do so by utilizing corrosive materials that weaken the pipes. Years of utilizing these drain cleaners can corrode the drain pipes, causing them to spring leakage more quickly and leading to the need for early replacement. Skilled plumbers should not use certain types of chemicals to disinfect sinks for a cause. Instead of attempting to clear the drain yourself, always arrange competent drain cleaning services.

Conclusion

A clogged drain can cause flooding as well. Although all of these strategies have benefits, you should still be aware of the possible drawbacks. As a result, you need the assistance of a skilled licensed plumber. A professional plumber will evaluate the plumbing device and any clog to decide the best process. If you have a clogged line, your plumber can recommend drain snaking before hydro-jetting, or he may say that hydro jetting is the only option. This would mean that the pipes are free of clogs and in proper working order.